The Sageon™ Micro Power Module delivers the unmatched capability of a full size Sageon™ Power System in a compact and cost effective solution. Designed to deliver up to 200 amps of power for 24 volt or 48 volt systems, the Micro Power Module provides the flexibility to put power where it is needed. The Micro Power Module also offers the flexibility to configure the best solution for your needs with options including integrated battery disconnects and load distribution; all in space saving configurations from two through seven rack units.

The Micro Power Module consists of a power frame that includes the Sageon™ Controller, mechanical mounting for up to seven Sageon™ Micro Rectifiers, all inter-system cabling, and optional items including AC input breakers, battery disconnects, DC distribution breakers and fuses, and remote communications - all factory installed and tested. Installation cost and time are minimized because there is only one component to install. To complete your system simply connect your AC and DC cables, plug-in the Sageon™ Micro Rectifiers, and you are ready to go.

In addition to the basic control functions, the Micro Power Module supports all of the advanced functionality available in a Sageon™ Power System including; remote monitor and control, battery testing, individual cell monitoring, programmable battery recharge current, and site monitoring.

High Density
Compact design with rectifiers at up to 16.6 watts per cubic inch, minimizing space required for installation

Remote Access
Remotely monitor and control the complete power system, reducing trips to site and increasing uptime

Battery Testing
Automatic or on-demand battery testing, insures batteries are functioning properly under real-world load conditions

Battery Monitoring
Continuous, individual cell level monitoring, providing 24 hour automated out-of-tolerance alarming and detailed identification by cell number

Programmable Battery Recharge Current
Programmable recharge current limit eliminates overcharging of standby batteries, extending their useful service life

Wide Input Voltage Range
Operating voltage range from 85 to 285 volts AC increases flexibility and insures unit functions under diverse conditions

Common Family
The Sageon™ Micro Power Module is part of the Sageon™ Family of scalable DC Power Plants which all feature a common controller, monitor and control software, and remote communications modules; eliminating the learning curve.
 

• Bulk Power
• System Expansion
• Outside Plant
• Homeland Security Networks
• Power System Upgrade
• Controlled Environment Vaults
• Wireless Sites
• Microwave Sites
• Cable / Internet
• OEMs

The Sageon™ Controller is a micro-processor based Power System Monitor and Control unit (PSMC) - the brains of the Sageon™ Micro Power Module. The Controller continually monitors and controls all of the Micro Power Module components for proper system operations to user configurable set points and generates local and remote alarms when system conditions are not meet; providing you with configuration flexibility and automated alerts. User configuration is accomplished through the keypad and display located on the front of the Controller, or through the PC based SageView® software tool included free with every system. The Controller is included standard in every system.

The Sageon™ Micro 24V and 48V Series Rectifiers are high efficiency, high power density switched mode rectifiers - the heart of the Sageon™ Micro Power Module. The rectifiers provide reliable AC to DC power conversion through their wide operation temperature range of -40ºF to 158ºF, wide AC input range of 85-285VAC, fault tolerance to 440VAC, high degree of transient protection, and self protecting / fault tolerant design. Phase-to-Phase and Phase-to-Neutral AC connections are fully supported allowing you to easily connect to your existing service. Rectifier ventilation is front to rear via self regulating forced air fans, eliminating the need to waste revenue generating space above and below the unit for cooling. Rectifiers are “hot-swapable” and will continue to operate without service interruption should the Sageon™ Controller ever fail or is removed from the system.

The Sageon™ AC Breaker module provides integrated AC breaker protection for the Sageon™ Micro Series Rectifiers for sites which require the installation convenience of a single AC feed, or simply require local AC disconnects, the AC Breaker module provides 1RU and 3RU solutions and can be configured for one to three rectifiers per breaker. The AC Breaker module also provides single-pole and two-pole breaker options to suite the needs for line-to-neutral (Y-connected) and phase-to-phase (delta-connected) AC feeds.

The Sageon™ Battery Distribution Module (BDM) provides integrated battery landing points, battery disconnect breakers, and battery current transducers for up to four battery strings; all within a space saving 1RU module. The BDM also contains reverse battery polarity protection and an optional low voltage battery disconnect (LVBD) with a user selectable disconnect set point. Combined with the Sageon™ Controller, digitally controlled Sageon™ Micro Rectifiers, and optional Sageon™ Battery Monitor (SBM), the BDM’s integrated battery current transducers enable the enhanced battery monitoring, discharge testing, and recharge current limiting features found in all of the Sageon™ Family of DC Power Plants.

The Sageon™ DC Breaker Distribution module provides ten integrated DC load distribution breakers, load distribution terminal blocks, and ground return terminal blocks; all within a space saving 1RU module. Breakers are ordered separately and are available in 2A, 4A, 8A, and 16A. Breakers are installed at the factory when ordered with a system and can be field installed by removing two screws from the module’s front cover and plugging in the new breakers.

The Sageon™ DC Fuse Distribution module provides ten integrated DC load distribution fuses, load distribution terminal blocks, and ground return terminal blocks; all within a space saving 1RU module. Fuses are ordered separately and are standard GMT type available in 0.5A through 15A sizes. Fuses can be field installed and replaced by plugging them into a socket on the module’s front cover.

Terminal blocks accept wire sizes from 12 to 26 AWG. Multiple Breaker and Fuse modules can be selected when ordering; providing ten, twenty, thirty, or forty DC protected distribution points and eliminating the need to add an external distribution panel. For sites which already have DC distribution, the Micro Power module can be ordered without a DC distribution module and connections can be made to the “bulk distribution” connection points; which are standard in every system.

The Sageon™ Micro Power Module user connections are located on the rear of the module, providing ample space and safe access for installation, additions, and maintenance. Available (standard and optional) user connections include AC Feed terminal blocks, six ground return landings (one Bulk power, four Battery String, and one CO ground), one Bulk power landing, one Battery String landing per battery breaker, as well as temperature compensation, remote communications and alarm relay connections. Cable landings are 2-hole studs, 5/8” spaced. All installation hardware (except lugs) is included.

The Sageon™ 3RU Battery Distribution Module/ Load Distribution Module (3RU BDM/LDM) combines all the features of the 1RU BDM while also providing breaker positions for high-current load breakers. The 3RU module provides up to four individual battery landing points, each with an integrated current transducer as well as an optional, low voltage battery disconnect (LVBD) with a user set table disconnect set point. Combined with the Sageon™ Controller, Sageon™ Micro Rectifiers and optional Sageon™ Battery Monitor (SBM), the 3RU BDM’s integrated current transducers enable the enhanced battery monitoring, discharge testing and recharge current limiting features found in all of the Sageon™ Family of DC Power Plants. Up to 11 total DIN rail mounted breakers can be combined into this rack space saving package with load breaker values from 5 to 100 Amps.